Combine this hoody with our performance base layer developed to dry fast creating the perfect moisture management solution when active in cool to mild conditions.
Check to add or remove this product from your cart.
Synthetic polyester, high collar zip neck base layer featuring faster drying fabric placement mapped into high sweating areas to aid thermal comfort. Treated with Polygiene® silver salt technology delivering excellent body odour control.
To ensure accurate fit, please take the time to measure yourself. All listed measurement descriptions correspond to approximate body measurements, not the dimensions of the garment.
Scroll Chart
Upper Body
S
M
L
XL
2XL
3XL
Chest
94 – 98cm
98 – 102cm
102 – 106cm
106 – 110cm
110 – 114cm
114 – 118cm
37 – 38.5″
38.5 – 40″
40 – 41.5″
41.5 – 43″
43 – 45″
45 – 46.5″
Waist
76 – 81cm
81 – 86cm
86 – 92cm
92 – 97cm
97 – 102cm
102 – 107cm
30 – 32″
32 – 34″
34 – 36″
36 – 38″
38 – 40″
40 – 42″
Chest Measurement Measure under armpit around the fullest part of the chest, keeping tape measure horizontal.
Waist Measurement Measure around the narrowest point at or around the navel, keeping the tape horizontal.
Product Overview
Medium weight camo hoodie favouring milder conditions. The Zircon Zephyr Hoody features a permanent hood offering increased concealment and head warmth when required. Sleeve cuff thumb holes provide increased hand insulation during chilly mornings, while pack compatible and extendable hand pocket / core vents allow access whether wearing a pack harness or belt bag.
To maintain optimum performance we recommend correct laundering of our products. Ensure all zippers and closures are fastened, machine wash using a gentle cycle with a water temperature not exceeding 30ºC (85ºF). We recommend Nikwax Tech Wash® when cleaning this product. Tech Wash® is an easy to use, safe, high-performance cleaner for technical outerwear clothing and equipment. It effectively removes tough stains, mud and dirt. TechWash® is scent-free and contains no UV brighteners.
The use of fabric softeners and bleach may affect the thermal, wicking and Durable Water Repellent capabilities of performance fabrics. We advise that no fabric softeners or bleach be used when laundering this product. Likewise, chemical solvents used in dry cleaning should be avoided. Do not dry clean.
The garment may be line or tumble dried on low setting after rinsing excess water. At all times keep away from direct heat. Do not iron.
This garment comes factory treated with a Durable Water Repellent (DWR) finish. DWR is a polymer based, chemical compound treatment applied to the face fabric during manufacture. It works by lowering the surface tension of the fabric, this will in turn cause water droplets to bead up and roll off.
In time, dirt and body oils, abrasion, and multiple launderings can diminish the effects of DWR. This will result in the fabric absorbing moisture more readily or ‘wetting out’. At this time, we recommend reproofing this product with Nikwax SoftShell Proof™ Wash In.
Reproofing of DWR is dependent on use, regular application is recommended to maintain your garments water repelling capability.
